100-2000A Open Loop Hall Effect Current Sensor with ±1% Accuracy
TKC-BHS5 Series high precision current sensor is a open loop device based on the measuring principle of the hall effect ,with a galvanic isolation between primary and secondary circuit, the size of primary not affect test precision, no matter the location of primary in the hole of current sensor, It uses for precision measurement of DC, AC and pulse current.
Electrical data(Ta=25℃±5℃,RL=2KΩ,CL=10000PF)
Type
Parameter | TKC20 BHS5 | TKC50 BHS5 | TKC100 BHS5 | TKC200 BHS5 | TKC300 BHS5 | TKC450 BHS5 | TKC500 BHS5 | Unit |
Rated input (Ipn) | ±20 | ±50 | ±100 | ±200 | ±300 | ±450 | ±500 | A |
Measure range(Ip) | ±40 | ±100 | ±200 | ±400 | ±600 | ±900 | ±1000 | A |
Rated output | @Ip=0-±Ipn ±1.0±0.5% | V |
| Zero voltage | @Ip=0 2.5±0.4% | V |
| Reference voltage | 2.5±0.4% | V |
Supply voltage | +5±5% | V |
| Power Consumption | ≤20 | mA |
Offset voltage | ≤±5.0 | mV |
Magnetic offset | ±5.0 | ±3.0 | mV |
Offset drift | ≤±0.2 | ≤±0.1 | mV/℃ |
output drift | ≤±0.5 | ≤±0.3 | mV/℃ |
Linearity | @Ip=0-±Ipn ≤0.5 | %FS |
Response time | @100A/μS, 10%-90% ≤5 | μS |
Bandwidth | @ -3dB DC～30 | KHZ |
Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV |
Applications
AC variable speed drives
Static converters for DC motor drives
Variable speed drives
Power supplies for welding applications
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Switched Mode Power Supplies(SMPS)
Mechanical dimension(for reference only)
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
Directions for use
When the current will be measured goes through a sensor, the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor)
Customs can adjust Output amplitude of the sensor by needs.
Custom design in the different rated input current and the output voltage are available.
Standards
- UL94-V0.
- EN60947-1:2004
- IEC60950-1:2001
- EN50178:1998
- SJ 20790-2000
General date
| | Value | Unit | Symbol |
| Operating temperature | -40 to +105 | ºC | TA |
| Storage temperature | -40 to +125 | ºC | TS |
| Mass(approx) | 65 | g | M |
Characteristics chart
Pulse current signal response characteristic Effects of impulse noise
Product Tags:
|
|
100-2000A Open Loop Hall Effect Current Sensor with ±1% Accuracy Images
|
